Makita Rechargeable Impact Driver TD173DRGXB [Black] Power Tools DIY

The first in Japan to use a "full-circumference" ring-emitting LED light, with optimal balance, a slim all-round head, and comfortable operability.
*For domestic rechargeable impact drivers. As of December 2022, according to Makita research.

Significantly improved visibility during work. Approximately 2.5 times brighter (compared to Makita's conventional 18V model). The illumination can be switched between three levels (strong/medium/weak).
*For domestic rechargeable impact drivers. As of December 2022, according to Makita research. Can also be used as a work light.

It can also be used as a simple light source in "light mode". The lighting time is about 1 hour.

New trigger switch. Intuitive trigger speed change operation possible from low to high speed range.
Grip is close to the shaft. The hand is close to the head, making it easy to press the shaft. Reduces cam-out. Battery is offset backward.
The center of gravity is optimized to allow for well-balanced tightening in all directions. It also reduces interference with obstacles. The operation panel is located at the rear, making it easy to see and use.
You can operate the mode and check the remaining battery capacity while holding the device.

The industry's smallest bit runout, double ball bearings are used. Newly designed bit sleeve.
Ribs are provided on the edges to prevent damage to components even if the sleeve comes into contact with them.
*For domestic rechargeable impact drivers. According to Makita research, December 2022.
Tilt angle is approximately 10.5°. Excellent corner hitting performance reduces cam-out. Comfortable for working close to walls.
Mode memory function allows you to select the optimal mode for your task.
You can register one of your frequently used modes by pressing the two buttons simultaneously.
Use the button on the device to switch between the "mode used previously" and "registered mode."


Product Specifications

●DC 18V, slide-type Li-ion battery specification
●Battery and charger included
●Tightening capacity: Small screws M4 to M8 / normal bolts M5 to M16 / high-strength bolts M5 to M14 / course thread 22 to 125 mm
●Maximum tightening torque: 180N・m
● Rotation speed [rpm]: Fastest 0-3,600/Strong 0-3,200/Medium 0-2,100/Weak 0-1,100
Easy mode rotation speed [rpm]: Wood 0-1,800/Bolt 0-3,600/Thin texture board 0-2,900/Thick texture board 0-3,600
●Number of strokes [strokes/min]: Fastest 0-3,800+ 0-3,600 Medium 0-2,600 Weak 0-1,100
●Easy mode impact number [times/min]: Wood 0-3,800/Bolt 0-3,800/Thin tex board Stops immediately after impact starts/Thick tex board 0-2,600
●Workload per charge (wood screws, material: lauan φ4.3 x 65 mm): Approx. 960 screws
● Unit dimensions: length 111mm x width 81mm x height 234mm
Weight: 1.5kg (including battery)